Customer Lifetime Value vs. Cost Per Lead in the Trades
Customer lifetime value is the gross profit one customer brings your business across every job they ever book with you, from the first service call to the day they move or switch. That number sets the most you can afford to spend winning a customer. Multiply it by your close rate and it sets the most you can pay for a lead. Most trades owners either never work it out or carry a figure in their heads that is several times too high. Both mistakes end the same way: buying the cheapest leads on offer. Here is the arithmetic, start to finish.
Key Takeaways
- Count lifetime value in gross profit, not revenue, because only the profit is money you can spend winning the next customer.
- In one 2019 trade-show analysis, about 60% of an HVAC customer's money and 73% of a plumbing customer's arrived in the first year.
- The most you can ever pay for a lead is gross-profit lifetime value multiplied by your close rate. A sensible target is about a third of that.
- Raising what each customer is worth lifts your ceiling on every channel at once, which beats shaving a few dollars off each lead.
What is customer lifetime value for a service business?
It is the total profit a customer is expected to bring you over the whole relationship. Wikipedia describes it as a prediction of the net profit a customer contributes across the entire future relationship with a business, then adds the line that matters most to an owner: it is an upper limit on what you should spend to win a new customer. You will also see it written as CLV, LTV or CLTV. All three mean the same thing.
There are two ways to look at it. The historic version adds up what your existing customers have actually spent. The predictive version estimates what a new customer will spend from here on. One looks backward, the other forward. For an owner-operator, the honest place to start is the historic version, built from your own invoices, because a forecast built on nothing is a hope with a dollar sign in front of it.
In the trades, a customer is a household, a landlord or a property manager. The lifetime is the run of jobs between their first call and the day they sell the house, move away or find somebody else. Some of those runs last one job. Some last fifteen years. The whole point of the number is knowing which kind you are paying to get.
If you would rather work through this with someone who does it every week, book a call.
How to calculate customer lifetime value (the formula that uses profit)
The customer lifetime value formula most owners need fits on the back of an invoice:
Average ticket × jobs per year × years they stay × gross margin
Each input comes from records you already keep. Average ticket and jobs per year come from your job software or a year of invoices. How long customers stay comes from looking back two or three years and counting how many of last year's customers booked again. Gross margin, the share of each sale left after parts, materials and the labor on that job, comes from your profit and loss statement or your accountant.
The margin step is the one most guides skip, and it changes everything. Say a customer pays you $2,000 over the years, and $1,000 of that went to equipment, parts and the technician's time. You did not earn $2,000 you can put toward marketing. You earned $1,000. A lifetime value built on revenue overstates your budget by the size of your materials and labor bill, and in the trades that bill is large. Formal versions also discount future dollars back to today's value, but for a small shop the margin step matters far more.
Before you average anything, split your customers into groups. Most trades businesses carry at least three:
- one-time callers who needed a single repair and never came back
- maintenance-plan households who book every season
- replacement and install customers who spend big once, then become one of the first two
One blended average across all three hides three different businesses inside one number. A plan household can be worth several times a one-time caller, and the marketing decisions are different for each. Working out the number per group is what makes it useful.
A second look at these inputs is part of what a call with GetLocalLeads.AI covers.
A customer lifetime value example: one heating and cooling customer
Here is a worked example with round numbers. These are illustrations, not industry averages, so swap in your own.
A homeowner calls in July because her air conditioner quit. In the first year she spends $1,200 with you: the repair, a follow-up visit when a second part failed, and a maintenance plan she signed on the way out. For the next four years she renews the plan and pays about $200 a year for tune-ups. Then she sells the house.
Her revenue over the relationship:
- Year one: $1,200
- Years two to five: 4 × $200 = $800
- Total revenue: $2,000
Now apply margin. Assume your gross margin on this work is 50%. Her gross-profit lifetime value is $1,000, and $600 of it landed in the first year.
Two things stand out. First, $1,000 is a long way from the five-figure number most owners carry around. Second, 60% of her money arrived in year one. That pattern is not a quirk of this example, as the next section shows.
What the number leaves out on purpose: in year nine she might have bought a new system from you for $8,000. Might. If your records show that a real share of plan households do replace with you, build that into the lifetime value for that group, at the rate it actually happens. If you are guessing, leave it out. A lifetime value padded with a maybe is how owners talk themselves into paying anything for a lead.
The same arithmetic works for a plumber, an electrician or a roofer, with different inputs. A roofer's customers may book once a decade, so the first job carries almost all of the value, and a lead is worth far less to a roofer than the size of one roof suggests.
Why most owners guess their number too high
Few owners have run this math, but nearly all of them have a number in mind, and it is usually too big. One 2019 analysis presented at the AHR Expo, an HVAC and plumbing industry trade show, found that contractors tend to place a customer's lifetime worth somewhere between $15,000 and $20,000. The averages in the same analysis were far lower: $2,679 for an HVAC customer, $1,055 for a plumbing customer and $2,669 for a business doing both, as reported by HPAC Engineering. That data is from 2019 and from one consultant's client base, so treat it as a sanity check, not as your number.
The same analysis found the money arrives early. About 60% of what an HVAC contractor ever sees from a customer comes in the first year, and 73% for plumbers. After that it falls away: 17% across years two and three, and another 17% after year four.
Why does the guess run so high? Owners remember their best customers, like the property manager with forty units who calls every month, and forget the hundreds of one-job callers. They count revenue instead of profit. They count the system replacement that might happen as if it already did.
A number that is too high is as dangerous as no number at all, because it can justify paying almost anything for a lead.
If you want to see where your calls come from today, ask for your free AI visibility audit.
From lifetime value to the most you can pay for a lead
Lifetime value turns into a lead budget in two steps.
Step one is per customer. Your gross-profit lifetime value is the walk-away price for winning a customer. Spend that much and the customer earned you nothing. Spend more and you paid for the privilege of doing the work.
Step two is per lead, because not every lead becomes a customer. Multiply the per-customer figure by your close rate, the share of leads that turn into paying jobs. Back to the homeowner in the example: $1,000 of gross-profit lifetime value, and say you close 40% of the leads you get. The walk-away price per lead is $1,000 × 40% = $400.
Nobody should run a business at the walk-away price, so set a working target below it. If you want to keep two-thirds of the gross profit a customer brings in, you can spend one-third to win them. That is about $333 per customer, which at a 40% close rate comes to about $133 per lead. Then check payback. That $333 comes back out of the $600 of first-year gross profit before the year is out, which matters in a trade where spring spending has to be paid for before the slow season.
Now you have a figure to hold every channel against. When you look at what each channel charges per lead, the question stops being "which one is cheapest" and becomes "which ones come in under $133 for customers like this."
Close rate is the lever owners forget. Run the same customer at a 25% close rate and the target drops to $1,000 × 25% ÷ 3, roughly $83 per lead. Nothing about the channel changed. The way the phone was answered and the job was quoted changed. A shop that closes well can outbid a shop that does not, and still make more on every job.
We can show you what your leads are worth to you on a short call.
Is the 3:1 LTV to CAC ratio right for the trades?
Customer acquisition cost, or CAC, is everything you spent to win new customers divided by the number of customers you won. The LTV to CAC ratio compares the two, and the common rule says lifetime value should be at least three times acquisition cost.
That rule has a source. David Skok of Matrix Partners, a venture capital firm, set out the guideline for software subscription companies: a ratio higher than 3, with the cost of winning a customer recovered in under 12 months. It was written for businesses that bill monthly and can see exactly how long each customer stays.
The ratio travels to the trades fine. The inputs usually do not. A 3:1 ratio calculated on revenue becomes 1.5:1 at a 50% gross margin, and if the lifetime value was a hopeful guess, it can sink below 1:1, which means marketing cost more than the customer earned you. Fix the inputs first, then use the ratio. Keep the payback check beside it, because for a seasonal business how fast the money comes back matters as much as how much.
Someone has to own these numbers month to month. In a larger company that is a marketing director. For an owner-operator it is usually the owner, or a fractional CMO who looks after the numbers part-time.
Bringing your numbers to a call with GetLocalLeads.AI is a good way to pressure-test them.
Not every lead source brings you the same customer
Averaging lifetime value across the whole business hides the most useful thing it can tell you: which lead sources bring in which kind of customer.
Take two leads. One costs $60 from a shared lead platform and turns into a one-time caller who picked you because you were cheapest that afternoon. The other costs $150 from search and turns into a plan household that stays five years. The expensive lead was the cheap customer. A report that only shows cost per lead would have told you to buy more of the first one.
To see this in your own business, every call and form has to be tied to its source. That is what lead tracking does. GetLocalLeads.AI, an AI visibility and digital marketing agency for local and multi-location service brands, includes it with every monthly service. It connects each call to the search, ad or profile that produced it, and our lead value projections use your own customer lifetime value and close rate to show what those leads are worth to you.
One caution. Channels work together. A homeowner may see your Google Business Profile, read a review and call from an ad a week later. Judge channels in combination, and never cut one on a single month's ratio.
A call is the quickest way to see what your current tracking can and cannot tell you.
Raise what a customer is worth before you chase cheaper leads
Most owners try to fix the math from the lead side, hunting for a cheaper source. The bigger lever sits on the other side. Research by Frederick Reichheld of Bain & Company, reported in Harvard Business Review in 2014, found that raising customer retention by 5% raised profits by 25% to 95%, and the same article puts the cost of winning a new customer at five to 25 times the cost of keeping one. Those figures come from across industries, not the trades specifically, but the direction holds for any business with repeat work.
The levers are plain. Answer the phone, because a missed call loses the customer and everything they would have spent. Offer a maintenance plan. Follow up after the job. Ask for the review.
Each one raises lifetime value, and a higher lifetime value raises the price you can afford for a lead. That is how a well-run shop wins the bidding against a competitor who can only afford half as much per lead.
If you want help raising that number, book a call with GetLocalLeads.AI.
Frequently asked questions
What is a good customer lifetime value for a contractor?
There is no single good number, because it depends on your trade, your margin and which customers you count. One 2019 trade-show analysis put the average at about $2,679 for an HVAC customer and $1,055 for a plumbing customer. Use that as a sanity check, then calculate your own from your invoices.
Should customer lifetime value use revenue or profit?
Gross profit. Revenue includes the parts, materials and labor you already paid for, which is money you cannot spend winning the next customer. A revenue-based figure overstates your marketing budget by the size of those costs.
What is a good LTV to CAC ratio?
The common target is 3:1, a guideline first written for software subscription companies. It works for the trades when lifetime value is calculated on gross profit from your own records. Add a payback check: the cost of winning a customer should come back within the first year.
How much should I pay for a lead?
Multiply your gross-profit lifetime value by your close rate to get the most you could ever pay, then aim for about a third of that. A customer worth $1,000 in gross profit, at a 40% close rate, gives a $400 ceiling and a working target of about $133 per lead.
How do you increase customer lifetime value?
Keep customers longer and give them more reasons to book. Answer every call, offer a maintenance plan, follow up after each job and ask for reviews. Each one raises the lifetime value of a customer, which raises what you can afford to pay for the next lead.
Run the number before your next marketing bill
Pull last year's invoices this week. Split your customers into one-time callers, plan households and install customers. Work out gross-profit lifetime value and close rate for each group, then write the walk-away price per lead somewhere you will see it when the next marketing invoice arrives. Then look hard at your close rate, because moving it from 25% to 40% raises that price by more than half. If you would like help with the numbers, book a call.